Performance Overview

Upgrade your factory steering with this Heavy Duty 1-ton Steering featuring 7075 Aluminum bars for the Ultimate in strength and durability. Got Bent steel steering bars? 7075 Aluminum not only is lighter weight but can take a hit, deform and then pop back straight whereas steel just bends and stays bent. Features:

1.5 inch thick solid 7075 T6 Aerospace Aluminum links

Machined wrench flats for easy tightening and a smooth look

Able to be flipped to above knuckle or under

Compatible with Right Hand Driver (RHD) vehicles

Features Heat Treated Chromoly Offset rod ends to clear differential cover and other vehicle components

Uses Massive 3/4 inch Grade 8 bolts for fastening to knuckles

Includes 3/4 inch stover locking nuts for worry and maintenance free fastening

All rod ends uses high misalignment spacers for increased rod end longevity and improved articulation

Drilling Of Knuckles TO 3/4 inch Required

Includes:

2 LH and 1 RH - OFFSET XM 7/8 inch x 7/8 inch bore rod end for tie rod and drag link at the knuckle

1 RH - JMX 7/8 inch x 7/8 inch bore rod end for drag link at the pitman arm

2 RH and 2 LH - 7/8 inch x 14 tpi Jam Nuts

8 - 7/8 inch x 3/4 inch bore high misalignment spacers

4 - Grade 8 3/4 inch fine thread bolts

4 - 3/4 inch fine thread Stover locking nuts

1 - 1.5 inch OD 7075 T6 Aluminum threaded solid bar for drag link

1 - 1.5 inch OD 7075 T6 Aluminum threaded solid bar for tie rod

Note: Not for use with Stock or AEV wheels. Must be used with 17 inch wheel with 4.75 inch backspacing or less.

Key Features

• Designed for compatible vehicle applications listed in the fitment table
• Built for reliable replacement, repair, or upgrade use
• Please verify year, make, model, and notes before ordering

FAQ

Will this fit my vehicle?
Please verify your year, make, model, position, and any fitment notes using the compatibility list above before purchase.

What part number is this?
The listed part number is SK1405.

Is this product designed for direct replacement?
Yes. This product is intended to match compatible vehicle applications listed in the fitment section.

Should I confirm fitment before ordering?
Yes. Always compare your original part, position, and vehicle details with the fitment chart before ordering.

Vehicle Fitment Table

Common Searches

• JK Aluminum Steering Kit with 7/8 in Rod Ends For 07-18 Wrangler JK for Jeep Wrangler / Wrangler JK
• 2007 Jeep Wrangler JK Aluminum Steering Kit with 7/8 in Rod Ends For 07-18 Wrangler JK
• SK1405 fitment
• Artec Industries JK Aluminum Steering Kit with 7/8 in Rod Ends For 07-18 Wrangler JK
• Left JK Aluminum Steering Kit with 7/8 in Rod Ends For 07-18 Wrangler JK
• 2007-2018 Jeep Wrangler / Wrangler JK JK Aluminum Steering Kit with 7/8 in Rod Ends For 07-18 Wrangler JK