# Artec Industries TR8802 8.8 Swap Kit W/Truss Jeep Grand Cherokee for 1993-1998 Jeep Grand Cherokee ### Performance Overview Artec Industries is excited to announce the TJ 8.8 Axle Swap Kit. This heavy duty truss and bracket system is designed to take serious abuse and reinforce your entire axle while also providing the factory link, anti-sway bar, and shock locations. The 1/4 inch thick truss top incorporates a unique design to strengthen both the axle and incorporate the link brackets For ease of installation and added strength. By incorporating the link mounts into the truss, hours of work and trial and error can be avoided when compared to other bracket systems. Simply tack weld the truss together, place it on the axle and all the other brackets fit into place exactly where they need to be. The Ford Explorer 8.8 features: same lug nut bolt pattern as Dana 35, 3-1/4 inch diameter tubes as compared to 2.625 inch Dana 35, disc brakes (1995 & newer), 31 spline axle shafts, 8.8 inch diameter ring gear which 120 percent stronger than Dana 35, only 20 pounds more than Dana 35, and a trac-loc differential stock. When swapping, the 3.73 gear ratio may need to be changed to match your Jeep gears and wheel spacers may be necessary to bring the width back to factory specs since the 8.8 is 1.25 inch narrower than the Dana 35. ### Key Features - Designed for compatible vehicle applications listed in the fitment table - Built for reliable replacement, repair, or upgrade use - Please verify year, make, model, and notes before ordering ### Product Details - Sold As Each Features include: - 1/4 inch thick mild steel truss and brackets For much higher strength than the factory bracket and other aftermarket brackets. - Precision CNC cut and bent For great fitment. - Includes all the brackets necessary For a complete axle swap including upper and lower control arm mounts, shock mounts, anti-sway bar mounts, tracbar mount, and coil spring mounts. - Save hours of installation time. Brackets are jigged into truss and set exact position automatically. - All other brackets just need to line up to truss, no guessing and measuring involved. - Tracbar mount includes both factory location and lifted bracket location For those who have aftermarket lifts. - Easily upgradeable For future link geometry changes. Just trim off factory location upper link mounts and weld on new centered link mounts. - Truss is reinforced using interlocked 1/4 thick gussets For maximum strength and easy assembly. - Overall low profile design means your axle is stronger, sleaker, easier to fit into any vehicle, and less likely to interfere with vehicle components. - This Kit requires general welding and fabrication skills. - Welding should only be done by a competent welder. - Artec Industries implies no guarantees or warranties and is not liable For improper installation. - Some grinding and fitment may be required when installing this Kit depending on your lift and other factors. - Every axle varies slightly and some fabrication may be required. - Will require brake line relocation to fit. ### FAQ **Will this fit my vehicle?** Please verify your year, make, model, position, and any fitment notes using the compatibility list above before purchase. **What part number is this?** The listed part number is TR8802. **Is this product designed for direct replacement?** Yes. This product is intended to match compatible vehicle applications listed in the fitment section. **Should I confirm fitment before ordering?** Yes. Always compare your original part, position, and vehicle details with the fitment chart before ordering. ### Vehicle Fitment Table Year Make Model Position Fitment Precision Note 1993 Jeep Grand Cherokee Upper Trim/Submodel: Base 1993 Jeep Grand Cherokee Upper Trim/Submodel: Laredo 1993 Jeep Grand Cherokee Upper Trim/Submodel: Limited 1993 Jeep Grand Cherokee Upper Trim/Submodel: SE 1994 Jeep Grand Cherokee Upper Trim/Submodel: Laredo 1994 Jeep Grand Cherokee Upper Trim/Submodel: Limited 1994 Jeep Grand Cherokee Upper Trim/Submodel: SE 1995 Jeep Grand Cherokee Upper Trim/Submodel: Laredo 1995 Jeep Grand Cherokee Upper Trim/Submodel: Limited 1995 Jeep Grand Cherokee Upper Trim/Submodel: Orvis 1995 Jeep Grand Cherokee Upper Trim/Submodel: SE 1996 Jeep Grand Cherokee Upper Trim/Submodel: Laredo 1996 Jeep Grand Cherokee Upper Trim/Submodel: Limited 1997 Jeep Grand Cherokee Upper Trim/Submodel: Laredo 1997 Jeep Grand Cherokee Upper Trim/Submodel: Limited 1997 Jeep Grand Cherokee Upper Trim/Submodel: Orvis 1997 Jeep Grand Cherokee Upper Trim/Submodel: TSi 1998 Jeep Grand Cherokee Upper Trim/Submodel: 5.9 Limited 1998 Jeep Grand Cherokee Upper Trim/Submodel: Laredo 1998 Jeep Grand Cherokee Upper Trim/Submodel: Limited 1998 Jeep Grand Cherokee Upper Trim/Submodel: TSi ### Common Searches - 8.8 Swap Kit W/Truss Jeep Grand Cherokee for Jeep Grand Cherokee - 1993 Jeep Grand Cherokee 8.8 Swap Kit W/Truss Jeep Grand Cherokee - TR8802 fitment - Artec Industries 8.8 Swap Kit W/Truss Jeep Grand Cherokee - Upper 8.8 Swap Kit W/Truss Jeep Grand Cherokee - 1993-1998 Jeep Grand Cherokee 8.8 Swap Kit W/Truss Jeep Grand Cherokee ## Details - **Price:** 1157.2 CAD - **Vendor:** Artec Industries - **Type:** 8.8 Swap Kit W/Truss Jeep Grand Cherokee - **Tags:** 1993 Jeep Grand Cherokee, 1993-1998 Jeep Grand Cherokee, 1994 Jeep Grand Cherokee, 4x4 Parts, 8.8 Swap Kit W/Truss Jeep Grand Cherokee, Artec Industries, Automotive Parts, Off Road Parts, Performance Parts, Replacement Parts, TR8802, Upper, Vehicle Upgrade ## Variants | Variant | Price | Available | |---------|-------|-----------| | Default Title | 1157.20 CAD | In stock | ## Images - Artec Industries TR8802 8.8 Swap Kit W/Truss Jeep Grand Cherokee for 1993-1998 Jeep Grand Cherokee image --- > Source: [Standard Auto Part](https://www.standardautopart.com/products/artec-industries-tr8802-8-8-swap-kit-w-truss-jeep-grand-cherokee-1993-1998-jeep-grand-cherokee) > Updated: 2026-09-11